MOBILE ENERGY STORAGE
VitaCell15
MOBILE ENERGY STORAGE SYSTEMPOWER WHERE YOU NEED IT. WHEN YOU NEED IT.
VitaCell15 combines LFP battery storage, hybrid power conversion and intelligent energy management in one mobile system, designed to supply loads, store energy from the grid or photovoltaic sources and integrate with generators.
- Nominal output power
- 15 kWNominal output power
- Battery capacity
- 33 kWhBattery capacity
- Battery chemistry
- LFPBattery chemistry
- Maximum PV power
- 30 kWMaximum PV power
- Protection rating
- IP54Protection rating
- Connectivity
- 4G LTEConnectivity
SYSTEM ARCHITECTURE
Energy in.
Energy managed.
Energy delivered.
VitaCell15 accepts energy from the grid, photovoltaic modules or a generator, stores it in the LFP battery and delivers it to connected loads under EMS control.
- GRIDAC input
- SOLAR PVUp to 30 kW
- GENERATORHybrid operation
- LFP BATTERY
- HYBRID INVERTER
- EMS
- DC/DC
- SYSTEM PROTECTION
INTELLIGENT ENERGY MANAGEMENT
Operating scenarios
The integrated Energy Management System coordinates how energy is stored and delivered according to the available sources.
Grid + storage
The grid can supply connected loads while charging the battery.
Solar + storage
External photovoltaic modules can supply energy and charge the battery through the system.
Battery power
When external sources are unavailable, the load is supplied by the battery alone.
Generator + storage
A generator with 380/400 VAC three-phase output can charge VitaCell15 and support hybrid operation.
Generator auto start/stop
The EMS controls generator start and stop through dry contacts according to the configured SoC thresholds, provided the generator controller supports this function.
Parallel operation
The system supports parallel operation of up to 6 units through dedicated cabling and EMS enablement.
APPLICATIONS
Where it works VitaCell15
Construction
Temporary power and hybrid power for construction sites.
Agriculture
Energy storage for farms, irrigation systems and remote agricultural operations.
Rental
Mobile energy storage for rental fleets and temporary power providers.
Events
Lower-noise stored energy for temporary installations and events.
Commercial
Backup and energy management for commercial operations.
Remote sites
Energy where permanent grid infrastructure is unavailable or limited.
Solar energy
Store locally generated photovoltaic energy.
Generator hybridization
Reduce unnecessary generator operating hours by combining generation and battery storage.
Backup power
Stored energy available when the primary source is unavailable.
Run the generator only when needed.
VitaCell15 can control generator start and stop through dry-contact signals based on the configured State of Charge thresholds.
- 01BATTERY SUPPLIES LOAD
- 02SOC BELOW START THRESHOLD
- 03GENERATOR START REQUEST
- 04BATTERY RECHARGE
- 05SOC ABOVE STOP THRESHOLD
- 06GENERATOR STOP REQUEST
Available when the generator controller supports dry-contact start/stop. For charging, the generator must provide a 380/400 VAC three-phase output.
Store the sun.
External photovoltaic modules can be connected directly to VitaCell15 to charge the battery and supply connected loads.
- Maximum PV power
- 30 kW
- MPPT
- 2
- Maximum input current
- 30 A / 30 A
- MPPT voltage range
- 160–950 VDC
- Start voltage
- 180 VDC
SCALABILITY
Scale by unit.
The system supports parallel operation of up to 6 units through dedicated cabling and EMS enablement. Parallel configurations must be defined together with VitaCell technical support.
Mobile and redeployable.
VitaCell15 is designed as a mobile and redeployable energy storage system that can be moved between sites with appropriate handling equipment.
- Dimensions
- 1040 × 1092 × 1157 mm
- Weight
- 670 kg
ANATOMY
Front panel
GALLERY
Technical detail
TECHNICAL SPECIFICATIONS
Full data
01Output
- Nominal output power
- 15 kWUp to 90 kW with 6 units in parallel
- Nominal output voltage
- 400 VAC or 230 VAC
- Output current
- 32 A
- Apparent power
- 22.5 kVA
- AC frequency
- 50 / 60 Hz
- Three-phase four-wire system
- 3P + N
- Overload capability
- 120% for 10 min · 200% for 10 s
02Input
- Nominal input power
- 15 kW
- Nominal input voltage (three-phase)
- 380 V / 400 V — 22.5 A
- Nominal input voltage (single-phase)
- 220 V / 230 V — 22 AAdditional converter required
- THDi
- ≤ 3%
03Battery
- Battery type
- Lithium Iron Phosphate (LFP)
- Battery capacity
- 33 kWhUp to 132 kWh with 4 units in parallel
- Depth of Discharge
- 90%
04Photovoltaic
- Voltage
- 550 – 950 VDC
- Maximum power
- 30 kW
- Number of MPPT
- 2
- Maximum input current
- 30 A / 30 A
- MPPT voltage range
- 160 – 950 VDC
- Start voltage
- 180 VDC
05System & environment
- Protection rating
- IP54
- Maximum units in parallel
- 6
- Operating temperature
- -20 °C ~ 50 °C
- Storage temperature
- -40 °C ~ 75 °C
- Relative humidity
- 0 ~ 95%, non-condensing
- Altitude
- Up to 4000 mPerformance derating above 4000 m
- Cooling method
- Natural cooling
- Communication
- 4G LTE supported
06Dimensions & weight
- Dimensions
- 1040 × 1092 × 1157 mm
- Weight
- 670 kg
DOWNLOADS
Documentation
Request information about VitaCell15.
Send us your requirements and our technical team will get back to you with the right configuration.
Configure VitaCell15 for your application.